Classic EW2 1 gal 2-Part Water Base Epoxy Coating
Out of Stock
This product is currently unavailable.
Color
Clear, Transparent
Coverage Area (Ft²)
700
Fade Resistant
Yes
Mildew Resistant
Yes
One Coat Coverage
No
Primer Required
Yes
Classic Water Base Epoxy is a 2-part system A & B that comes clear or pigmented in 16 different colors. It has low voc and high solids designed to be used over most polymer modified cementitious toppings, concrete or waterborne colorants systems and over concrete restoration coatings where a low maintenance is desired. May also be applied to Spanish tile, provided the surface is properly prepared. Cleans up easily with soap and water. Available in 1 gallon jugs. Caution: Surface is slippery when wet. New concrete must cure for 28 days before application.
- Low voc, high solids designed to be used over most polymer cementitious toppings, concrete or waterborne colorants
- Resists water penetration, motor oil, etc.
- Low cost, odor & maintenance
- High solids & gloss
- Cleans up easily with soap and water
- Available in clear, or pigmented in one of 16 different colors
- Storage life 1 to 1.5 years
General | |
|---|---|
Color | Clear, Transparent |
Coverage Area (Ft²) | 700 |
Fade Resistant | Yes |
Mildew Resistant | Yes |
One Coat Coverage | No |
Primer Required | Yes |
Sheen / Finish | High Gloss |
Stain-Resistant | Yes |
Use Location | Interior/Exterior |
Voc Regulatory Level (G/L) | < 50 |
Waterproof | Yes |
Compliance and Restrictions | |
|---|---|
Hazardous Material | Hazardous Material delivery restrictions may apply. You may be contacted by Customer Service if an alternate delivery method is required. |
California Proposition 65 | Warning: Cancer and Reproductive Harm <a href="https://www.P65Warnings.ca.gov"target="_blank">www.P65Warnings.ca.gov</a> |