0

Werner L7304 4' Type IAA Fiberglass Leaning Ladder

$0.00/EACH
Werner

Werner L7304 4' Type IAA Fiberglass Leaning Ladder

SKU# 245L7304

MFG# L7304

MAIN_IMAGE
DETAILED PRODUCT VIEW 2_IMAGE

Ansi Approved

Yes

Ansi Ladder Rating

Type IAA

Assembled Weight [Lbs]

16

Base Spread (In)

41.25

Base Width (In)

20.4

Csa Certified

No

The L7304 fiberglass 4ft leaning ladder is ideal for the professional. With a duty rating of 375lb, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard stepladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a standard stepladder is not an option on a jobsite, so we designed the LEANSAFE® ladders with a two color design and highly visible LEANSAFE® logos to make this ladder easily distinguishable from a standard stepladder. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner's patent pending single latch design stays engaged when needed, and is centrally located to easily open and close. Anchoring the ladder is the EDGE360®® bracing to protect the bottom of the ladder. LEANSAFE® ladder front feet have curved non-marring rubber foot pads that maximize the surface area in both the stepladder and leaning ladder modes. Available in 4, 6, 8, 10, and 12 foot heights. Built with a 375 pound duty rating this L7300 series ladder provides the professional contractor a single ladder that works as an improved standard stepladder and leaning ladder to safely get closer to your work.
  • LEANSAFE® ladder top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
  • Every rivet backed up by metal plate or washer to protect rails
  • 4 ft LEANSAFE® leaning ladder in stepladder mode has a maximum standing height of 1 ft 8 in and a max reach height of 8 ft 4 in
  • Dropped rear rail pivot point gets ladder closer to your work
  • Color and branding differentiates LEANSAFE® from standard stepladders
  • Rail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning mode
  • Curved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder mode
  • Double riveted slip-resistant TRACTION-TRED® steps
  • Back-up plates reinforce all top connectors
  • Heavy duty internal spreaders
  • Full set of rear horizontals spaced one per foot

General

Ansi Approved

Yes

Ansi Ladder Rating

Type IAA

Assembled Weight [Lbs]

16

Base Spread (In)

41.25

Base Width (In)

20.4

Csa Certified

No

Distance Between Rung/Steps (In)

12.0

Duty Rating (Lbs)

375

Frame Color / Finish

Yellow, Orange, Black

Ladder Height

4'

Ladder Length (Ft)

4

Ladder Material

Fiberglass

Ladder Type

Step

Manufacturer Warranty

None

Number Of Steps

4

Osha Approved

Yes

Rung/Step Depth (In)

3.0

Rung/Step Material

Aluminum

Step Color

Silver

Top Cap Material

Polypropylene

Weight (Lbs)

16