DeWALT TOUGHWIRE
Questions? Ready to Buy?
Take advantage of fast, strong, and easy suspension solutions with TOUGHWIRE™ Cable Hangers.
Combine wire assemblies, wire locking devices, components, and accessories with TOUGHWIRE™ Cable Hangers to create a suspension solution catered to HVAC, sheet metal, electrical, and plumbing/pipe applications.
Clear identifiers mark the proper directional usage and device pairings for quick assembly.
Wire constructions are designed to support a variety of tough hanging applications.
Securely handle while wearing gloves.
Install TOUGHWIRE™ up to 28% faster than traditional method*
*DEWALT Threaded Stud Wire Assembly Attachment DTW0206T2 and DEWALT ToughLock™ Wire Locking Device DTWTOUGHLOCK02 vs. traditional threaded rod method.
TOUGHWIRE™ Devices
TOUGHLOCK™ Wire Locking Devices
Designed to provide ultimate flexibility, TOUGHLOCK™ Wire Locking devices help users customize an easy suspension solution for HVAC, sheet metal, electrical, and plumbing/pipe applications.
STRUTLOCK™ Wire Locking Devices
This device is installed into the strut or channel profiles used to hang trapeze supports. Featuring tool-free adjustability and locking, the TOUGHWIRE™ Wire Locking Devices help create an adjustable and lockable device correlation for HVAC, sheet metal, electrical, and plumbing/pipe applications.
SQUARELOCK™ Wire Locking Devices
Features a large protruded slider pin that allows for tool-free adjustability and the L-shaped design quickly attaches fitment to hardware material. Creates an adjustable and lockable device correlation for HVAC, sheet metal, electrical, and plumbing/pipe applications.
SQUARELOCK™ PAD Wire Locking Devices
An EPDM gasket pad is engineered into the device to help dampen sound and vibration. Features a large protruded slider pin that allows for tool-free adjustability and the L-shaped design quickly attaches to hardware material. Creates an adjustable and lockable device correlation for HVAC, sheet metal, electrical, and plumbing/pipe applications.
TOUGHWIRE™ Wire Attachments
Loop End
This attachment allows TOUGHWIRE™ to be wrapped around purlins, beams, and other anchor points. This Loop End Wire Attachment then passes back through the loop creating a choke-knot suspension point. The suspension can be used by HVAC, sheet metal, electrical, and plumbing/pipe applications to complete a variety of building services.
Threaded Stud Assembly
This device is installed into the strut or channel profiles used to hang trapeze supports. Featuring tool-free adjustability and locking, the TOUGHWIRE™ Wire Locking Devices help create an adjustable and lockable device correlation for HVAC, sheet metal, electrical, and plumbing/pipe applications.
Tie-Wire Assembly
This wedge expansion anchor (sold separately) unites the TOUGHWIRE™ suspension system with the Tie-Wire Assembly Wire Attachment. Paired with a TOUGHWIRE™ Wire Locking Device, this wire attachment can be used to quickly suspend a variety of building services including HVAC, sheet metal, electrical, and plumbing/pipe applications.
Powder Pin 90° Clip Assembly
This CSI Powder Pin unites the TOUGHWIRE™ suspension system with the 90° clip assembly wire attachment. Paired with a TOUGHWIRE™ device, this wire attachment can be used to quickly suspend a variety of building services including HVAC, sheet metal, electrical, and plumbing/pipe applications. Usage of DEWALT® Powder-Actuated Tools (sold separately) required for Powder Pin 90° Clip Assembly Wire Attachments.
STICK-E™ 90º Clip Assembly
The STICK-E™ 90° Clip Assembly Wire Attachment unites with the TOUGHWIRE™ suspension system with use of a fastener (sold separately). Paired with a TOUGHWIRE™ device, this wire attachment can be used to quickly suspend a variety of building services including HVAC, sheet metal, electrical, and plumbing/pipe applications. The 20V MAX* Trak-It® C6 Gas Concrete Nailer (sold separately) is required for STICK-E™ 90° Clip Assembly Wire Attachments.
TOUGHWIRE™ Components
D-Clip
The D-Clip Wire Component is a one-piece clip that is used to fasten TOUGHWIRE™ to the mounting surface. Can be mounted on flat or sloped surfaces. TOUGHWIRE™ Loop End Wire Assembly products (sold separately) are looped through the D-Clip, then anchored to the structure with a variety of DEWALT® Anchors and Fasteners (sold separately).
Threaded Stud
Made of a Grade 5 steel that allows for TOUGHWIRE™ Accessories, Components, and Wire Locking Devices to be paired with a wide range of DEWALT® Anchors and Fasteners and other internally threaded hardware products (sold separately). Available in two sizes: 3/8”-16 x 2”. and 3/8”-16 x 5” standard UNC all-thread rod.
TOUGHWIRE™ Accessories
Cable Cutter
Cut multiple wire sizes DW1, DW2, and DW3 with this Cable Cutter Wire Accessory. DEWALT® Cable Cutter Wire Accessory is made only to be paired with TOUGHWIRE™ products.
Cable Spool
This Cable Spool Wire Accessory is available in 330’ and 650’ lengths with wire sizes DW1, DW2, and DW3. Used in conjunction with with DEWALT® TOUGHWIRE™ components for suspension systems.
Competitive Solutions
The TOUGHWIRE™ lineup offers a variety of wire attachments, wire locking devices, wire components, and wire accessories that are strong, fast, and easy to install. Find the cable hangers you need for your industry.
Explore Solutions
Learn about the features and benefits of our TOUGHWIRE™ Cable Hangers and see the wide range of suspension solutions available.