Spray Paint

Filter

Skip to Results

Search Within Category

Additional Standards & Certifications

Meets USDA requirements for incidental food contact (7)

Meets the performance requirements of Federal Specifications DOD-P-21035A; MIL-P-26915C (1)

Ambient Temperature Range

25-90 degrees Fahrenheit (15)

Above 32 degrees Fahrenheit (10)

Applicable Materials

Ceramic, Plaster, Glass, Metal, Wood and Most Other Surfaces (1)

Drywall, Plaster, Wood and Stucco (1)

Galvanized Metals (1)

Masonry, Metal, Plastic and Wood (1)

Masonry, Metal, Plastic, and Wood (5)

Medium Metal, Cast Iron, and Stainless Steel (1)

Medium to Hard Aggregate and Medium Abrasive Sand (3)

Medium to Soft Aggregate and Abrasive Sand (1)

Metal (6)

Metal and Steel (3)

See All

Application

Exterior Wood, Above or Below Ground, Ground Contact, Fresh Water Contact or Above Ground Installations (1)

Galvanized Metal (1)

Heavily Rusted Metal (1)

Metal, Wood, Concrete, Masonry and More (12)

Metal, Wood, Masonry and More (2)

Metal, Wood, Masonry, Plaster, Unglazed Ceramic and More (1)

Metal, Wood, Plastic and More (3)

Spray, Marking Wand, Marking Pistol (20)

Spray, Striping Machine, Striping Wand (6)

Application Method

Brush, Roller, Spray (1)

Putty knife (1)

Application Temperature

32 to 90 (1)

40 (1)

Approximate Coverage (Sq Ft)

10 (1)

12 (4)

15 (11)

20 (9)

6 (1)

8 (2)

Approximate Coverage Area (Sq Ft)

300 (1)

Assembled Depth (In)

10.38 (1)

15.63 (1)

2.6 (3)

2.63 (1)

2.75 (1)

Assembled Height (In)

10.25 (1)

7.8 (1)

7.88 (1)

7.9 (1)

8 (1)

8.06 (1)

9.5 (1)

Assembled Weight [Lbs]

1 (1)

1.15 (1)

1.25 (1)

1.45 (1)

1.51 (1)

1.510000 (1)

1.75 (1)

17.7 (1)

31.24 (1)

Assembled Width (In)

10.38 (1)

15.56 (1)

2.6 (3)

2.63 (1)

2.75 (1)

Astm Specifications

None (1)

Bit Diameter

1 (1)

1" (1)

1/2" (1)

1/4" (1)

5/8" (1)

Bit Material

Carbide Tipped (1)

High Carbon Steel (4)

Bit Type

Impact (4)

Masonry (1)

Can Be Sold In Otc States

No (1)

Yes (7)

Capacity

1 (3)

12 (7)

15 (3)

16 (1)

17 (6)

18 (4)

20 (2)

Capacity Uom

gal (3)

oz (23)

Case Included

No (5)

Chemical Make Up

Latex (1)

Chuck Fitment

SDS-Max (1)

Color

ANSI 61 Light Gray (1)

APWA Blue (1)

APWA Green (1)

APWA Red (1)

APWA White (1)

APWA Yellow (1)

Almond (1)

Aluminum (2)

Banner Red (1)

Black (7)

See All

Color Coded

No (1)

Color Family

Black (7)

Blacks (2)

Blue (5)

Blues (1)

Brown (3)

Clear (2)

Gray (5)

Grays (1)

Green (9)

Greens (2)

See All

Combustible

No (2)

Yes (55)

Composition

Acetone, Propane, Butane, Toluene, Lt. Aliphatic Hydrocarbon Solvent, 1,2,4Trimethylbenzene, Light Aromatic Hydrocarbons, Titanium Dioxide, Cumene (1)

Acetone, Propane, n-Butane, Naphtha, Petroleum, Hydrotreated Light, Titanium Dioxide, n-Butane, Acetone, Xylenes (o-, m-, p- isomers), 1,2,4-Trimethylbenzene, Ethylbenzene, Ethylene Glycol Monobutyl Ether, Methyl Ethyl Ketoxime (1)

Acetone, Propane, n-Butane, Naphtha, Petroleum, Hydrotreated Light, Xylenes (o-, m-, p- isomers), n-Butyl Acetate, Solvent Naphtha, Light Aromatic, Ethylbenzene, Octane, n-Heptane, Stoddard Solvent, Methyl Ethyl Ketoxime (1)

Acetone, Propane, n-Butyl Acetate, Titanium Dioxide, n-Butane, Hydrous Magnesium Silicate, Xylenes (o-, m-, p- isomers), Ethyl 3-Ethoxypropionate, Ethylbenzene (1)

Acetone, Propane, n-Butyl Acetate, n-Butane, BTitanium Dioxide, Xylenes (o-, m-, p- isomers), Solvent Naphtha, Light Aromatic, Ethylbenzene, Methyl Ethyl Ketoxime (1)

Acetone, Propane, n-Butyl Acetate, n-Butane, Barium Sulfate, Xylenes (o-, m-, p- isomers), Ethyl 3-Ethoxypropionate, Ethylbenzene, Methyl Ethyl Ketoxime (1)

Acetone, Propane, n-Butyl Acetate, n-Butane, Naphtha, Petroleum, Hydrotreated Light, Xylenes (o-, m-, p- isomers), Nanoscale Titanium Dioxide, Titanium Dioxide, Ethylbenzene, Ethylene Glycol Monobutyl Ether (1)

Copper Naphthenate, Monoethanolamine (1)

Hydrotreated Light Distillate, Titanium Dioxide, Solvent Naphtha, Light Aromatic, Methyl Ethyl Ketoxime, Naphtha, Hydrotreated Heavy, Cobalt 2-Ethylhexanoate (1)

Propane, Acetone, Titanium Dioxide, n-Butane, Naphtha, Petroleum, Hydrotreated Light, Dimethyl Carbonate, Xylenes (o-, m-, p- isomers), Ethylbenzene, Solvent Naphtha, Light Aromatic, Octane, Carbon Black, Cobalt 2-Ethylhexanoate (1)

See All

Container Material

Metal (1)

Container Size

1 gal (1)

12 oz (25)

14 oz (4)

15 (3)

15 oz (12)

17 oz (6)

18 oz (6)

20 oz (2)

Container Type

Aerosol Can (26)

Can (1)

Coverage

100 to 200 (1)

100 to 300 (1)

12 to 15 (6)

12 to 20 (7)

150 (4)

230 to 390 (1)

500 (1)

500 to 530 (5)

6 to 10 (1)

9 to 13 (1)

Coverage Thickness

One application (0-. 1/4") is usually sufficient for small repairs. For repairs deeper than 1/4”, apply two or more layers (1)

Drilling Depth (In)

16 (3)

6 (1)

Dry Heat Resistance

No (1)

Yes (23)

Dry To Handle

1 hr (16)

1-2 Hr (3)

1-2 hr. (8)

10 Min. (5)

10 minutes (1)

24 Hr (1)

30 Min (6)

5 Min (15)

5-10 Hr (1)

5-9 Hr (1)

See All

Dry To Re-Coat

24 Hr (2)

Anytime (7)

Before 1 Hr or after 48 Hr (2)

Within 1 Hr or after 24 Hr (14)

Within 1 Hr or after 48 Hr (4)

Within 1 hr. or after 24 hr. (7)

please visit www.daytonsuperior.com (1)

Dry To Tape

N/A (1)

Dry To The Touch

1 Hr (1)

10 Min. (5)

10 min (10)

10 to 20 (2)

10-20 Min (1)

10-20 min. (6)

15 Min (2)

15-30 Min (1)

2-4 Hr (1)

2-4 Hrs (1)

See All

Dry To Touch Time

1 Hr (1)

10 Min. (5)

10 min (11)

10 minutes (1)

10-20 Min (1)

10-20 min. (8)

15 Min (2)

15-30 Min (1)

2-4 Hr (1)

2-4 Hrs (1)

See All

Drying Time

10 (11)

10 to 20 (4)

12 (1)

15 to 30 (1)

2 to 4 (1)

24 (1)

30 (1)

<10 (4)

<30 (1)

Etched / Stamped Size Identification

No (1)

Fade Resistant

Yes (1)

Finish

Bright (1)

Flat (1)

Gloss (12)

Flammability Rating

1 (1)

Flammable

Yes (57)

Flash Point

-104 (1)

-104 C (5)

-19 (1)

-19 degrees C (1)

-20 (1)

-96 (4)

-96 C (42)

-96C (7)

41 C (1)

93.3 (1)

See All

Flute Length (In)

8.000000 (1)

Force Dry Method

N/A (55)

None (1)

please visit www.daytonsuperior.com (1)

Formula Base

Oil (1)

Hardness / Density Rating

not applicable (1)

Indoor / Outdoor

Indoor (1)

Indoor/Outdoor (54)

Outdoor (1)

Interior | Exterior

Interior/Exterior (3)

Invertable

Yes (26)

Length (Ft)

1 (1)

Length [In]

13.000000 (1)

16 (3)

6 (1)

Manufacturer Warranty

Limited (1)

N/A (1)

Satisfaction guaranteed for full refund of purchase price (1)

Material

93% Zinc (1)

Aluminum (1)

High Speed Steel (4)

Liquid Aerosol (1)

Titanium Dioxide (1)

Titanium Dioxide Aerosol (2)

Material

Spackling Paste (1)

Water Based (1)

Maximum Application Temperature

100 (3)

Maximum Application Temperature (°F)

100 (8)

90 (2)

Maximum Incremental Reactivity (Mir)

0.93 (1)

Mildew Resistant

No (1)

Min Application Temp

50 (3)

Minimum Application Temperature (°F)

50 (10)

Minimum Chuck Size Required

3/8 in (4)

Nominal Product Depth

0 (103)

Number Of Coats Recommended

2 (19)

Odor | Scent

Characteristic (1)

Pleasant (1)

Slight (1)

Solvent (2)

Solvent-Like (19)

Package Contents

1 gallon of spackling (1)

1 in. x 16 in. SPEEDemon™ Spade Bit (1)

1" x 13" SDS-MAX Bit, 6-Cutter (1)

1/2 in. x 16 in. SPEEDemon™ Spade Bit (1)

1/4 in. x 6 in. SPEEDemon™ Spade Bit (1)

5/8 in. x 16 in. SPEEDemon™ Spade Bit (1)

Package Depth (In)

11.25 (3)

2.5 (3)

3.0 (1)

Paint Type

Alkyd (1)

Gloss (13)

Marking Chalk (5)

Marking Paint (15)

Metallic (2)

Striping Paint (6)

Paintable Or Stainable

Yes (1)

Ph Range

7 to 12 (1)

Physical Form

Aerosol (1)

Liquid (27)

Paste (1)

Pigment Type

Zinc, Aluminum (1)

Prevents Rust

No (1)

Yes (14)

Primer Material

Oil (3)

Primer Required

No (26)

Yes (1)

Quantity (Fl Oz)

10 (2)

11 (2)

12 (16)

15 (8)

17 (20)

18 (6)

20 (1)

20.0 (1)

Quantity (Gal)

1 (1)

Quick Change Impact Driver Bit

Yes (4)

Ready To Use

Yes (1)

Recoat Time

24 (1)

Recommended Cleaning Method

Mineral spirits (2)

Wash tools immediately after use with water. Be sure container lid is closed and tightly sealed. Store in a cool, dry place. (1)

Xylene or Mineral Spirits (23)

Recommended Dry Film Thickness (Mil)

1.0 (6)

1.5 (1)

2 (10)

2.0 (3)

Recommended Safety Equipment

See product label and Material Safety Data Sheet (MSDS) for safety information. You can request an MSDS by visiting our website at www.dap.com or by calling 888-DAP-TIPS. (1)

Recommended Uses

Construction and Excavation Sites (5)

Docks and Piers, Fence Posts, Poles, Pickets and Rails, Construction Posts, Foundation Sills (1)

Galvanized Ducts, Storage Tanks (1)

General Purpose (1)

Indoor/Outdoor (1)

Indoor/Outdoor, Industrial (6)

Industrial (3)

Mark Aisles, Lift Truck Routes, Pallet Positions, Hazardous Areas and Commercial Parking Lots (4)

Striping Athletic Fields (1)

Utility Marking, Golf Courses, Landscaping, Construction Sites, Surveying, Mining (1)

Recommended Wet Film Thickness (Mil)

0.0 (2)

1.0 (3)

2 (10)

3.5 (1)

Resin Type

Epoxy Ester (1)

Modified Alkyd (15)

Oil Modified Alkyd (1)

VT Alkyd (2)

Resists

Abrasion, Chipping, Dulling, and Fading (1)

Blistering, Cracking, Corrosion, and Peeling (1)

Chipping, Fading, and Peeling (6)

Corrosion (1)

Cracking, Chipping, and Peeling (3)

Gas and Oil (1)

Moisture and Absorption (1)

Scuff (5)

Weather and Wear (3)

Weather, Wear, and Smudge (2)

Self Feeding

No (4)

Self-Priming

No (1)

Shank Diameter (In)

0.25 (4)

Shank Style

SDS-Max (1)

Sheen

Gloss (1)

Sheen / Finish

Flat (5)

Gloss (50)

Low Lustre (1)

Satin (1)

Sheen/Gloss

Satin (1)

Single / Double Ended

Single (4)

Size (Oz)

128 (1)

Specific Gravity

0.42 (1)

0.73 (1)

0.751 (1)

0.757 (2)

0.768 (1)

0.771 (1)

0.786 (1)

0.789 (1)

0.794 (1)

0.801 (1)

See All

Spread Rate

10-12 sq. ft./can (1)

100-300 sq.ft./gal (1)

12-15 sq.ft./can (11)

12-20 sq.ft./can (9)

150 linear ft at 4" wide (5)

230-390 sq.ft./gal. (1)

275-300 ft. at 3" wide (1)

4-6 sq.ft./can (1)

5-8 sq.ft./can (2)

500-530 linear ft. at 1.25" wide (5)

See All

Sub-Brand

Fast 'N Final (1)

Suitable For Use With

Aerosol Spray Can (1)

Surface

Drywall, plaster, wood, stone, stucco (1)

Surface Material

Concrete, Grass, Gravel, Pavement and More (26)

Temperature Range

32 to 90 (10)

50 to 100 (10)

50 to 90 (3)

Temperature Rating

32 to 90 (11)

50 to 100 (10)

50 to 90 (3)

Tint Base

Modified Alkyd (1)

Tintable

No (1)

Units Of Measurement

Gallons (1)

Units Of Measurement Quantity

1 (1)

Use Location

Exterior (1)

Interior/Exterior (3)

Viscosity

N/A (1)

Viscosity Of Hardener

N/A (1)

Voc Content

501 (1)

507 (2)

508 (1)

509 (1)

511 (2)

518 (1)

524.3 (1)

525 (2)

528 (1)

530 (1)

See All

Volume Capacity

51.0446 (1)

Warranty

No (1)

Yes (2)

Waterproof

No (28)

Yes (1)

Working Time

10 minutes (1)

112 items

Sort by

Best MatchProduct: A to ZProduct: Z to ABrand: A to ZBrand: Z to A

Product List ViewProduct Grid ViewProduct Table View

content loaded

Compare

Rust-Oleum

12OZ FLAT RUSTY METAL PRIMER SPRAY PAINT RUST OLEUM

SKU#:7617769830

MFG#:7769830

$15.99 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

17 Oz Fluorescent Red M1600 Inverted Marking Paint Rust-Oleum

SKU#:7611662838V

MFG#:1662838V

$10.19 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice 1600 System 12 oz Aerosol Can Light Gray Multi-Purpose Enamel Spray Paint

SKU#:761214645

MFG#:214645

$9.89 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice Almond Solvent Based General Purpose Spray Paint 12 oz

SKU#:7611672830

MFG#:1672830

$14.99 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA Blue Water Based Inverted Marking Chalk 17 oz

SKU#:761205236

MFG#:205236

$10.09 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA Red Water Based Inverted Marking Chalk 17 oz

SKU#:761205235

MFG#:205235

$10.79 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA White Water Based Inverted Marking Chalk 17 oz

SKU#:761205237

MFG#:205237

$10.79 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA Yellow Water Based Inverted Marking Chalk 17 oz

SKU#:761205234

MFG#:205234

$12.09 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

12OZ FLAT RUSTY METAL PRIMER SPRAY PAINT RUST OLEUM

SKU#:7617769830

MFG#:7769830

$15.99 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

17 Oz Fluorescent Red M1600 Inverted Marking Paint Rust-Oleum

SKU#:7611662838V

MFG#:1662838V

$10.19 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice 1600 System 12 oz Aerosol Can Light Gray Multi-Purpose Enamel Spray Paint

SKU#:761214645

MFG#:214645

$9.89 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice Almond Solvent Based General Purpose Spray Paint 12 oz

SKU#:7611672830

MFG#:1672830

$14.99 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA Blue Water Based Inverted Marking Chalk 17 oz

SKU#:761205236

MFG#:205236

$10.09 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA Red Water Based Inverted Marking Chalk 17 oz

SKU#:761205235

MFG#:205235

$10.79 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA White Water Based Inverted Marking Chalk 17 oz

SKU#:761205237

MFG#:205237

$10.79 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Compare

Rust-Oleum

Rust-Oleum Industrial Choice APWA Yellow Water Based Inverted Marking Chalk 17 oz

SKU#:761205234

MFG#:205234

$12.09 (EACH)

Add to List

Item pricing and delivery options may vary based on location. Select your local branch for best pricing.

Results Per Page

8162432