White Cap | Titebond | Joint and Crack Filler

Joint and Crack Filler

Search Within Brand

: 1.078 (1)
1.08 (2)
: ASTM C920, TYPE S, GRADE NS, CLASS 50, USE NT, T, G, M, A AND O / FEDERAL SPECIFICATION TT-S-00230C, TYPE II, CLASS A / APPROVED FOR USE ON BUILDINGS IN BOTH MIAMI-DADE COUNTY AND THROUGHOUT THE USA. More Specs on Titebond.com. (2)
: Advanced Polymer (2)
: Beige (1)
Gray (1)
: Plastic cartridge (2)
: Beige (1)
Gray (1)
: Solvent free/Not applicable (2)
: Liability is limited to product replacement only. (2)
: 300 (2)
: 140 (2)
: 0 (2)
: 0 (2)
: 0 (1)
: 1 (2)
: Uncured material may be cleaned with isopropyl alcohol. After curing, excess sealant must be cut or scraped away. Follow solvent vendor's precautions when using solvents. (2)
Uncured material may be cleaned with isopropyl alcohol. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents. (1)
: Use personal protective equipment as required. Wear protective gloves and eye or face protection. (2)
: Two hours (2)
: 10.1 (2)
: Aluminum, painted metal, PVC, concrete, wood, masonry, vinyl, glass, plastic, steel, asphalt roofing, wall panels, siding, flashing, sheet metal (2)
: No (2)
: Exterior (2)
: 500,000 cps (2)
: 500,000 cps (1)