• Home
  • Unistrut 1-5/8" x 20' 12 ga Solid Galvanized Strut
Image for Unistrut 1-5/8
+ / - Hover over image to Zoom
Other Views

Unistrut 1-5/8" x 20' 12 ga Solid Galvanized Strut

Brand: Unistrut Mfg#: P1000 20 PG
Product#: 202P100020PG
This product is currently not available.
Call for Quote
Based on Product Sourcing
Free UPS Ground Shipping on this Item!
This product has shipping restrictions. Additional Shipping Charges may apply. You may be contacted by Customer Service.
Add to Cart

WARNING: Cancer -  www.P65Warnings.ca.gov.


Please Login to receive Special Pricing
Not Registered? Create an Account



Description


Unistrut channels are accurately and carefully cold formed to size from low-carbon strip steel. All spot-welded combination members, except P1001T, are welded 3" (76 mm) maximum on center.


Features


  • Standard Lengths for channel are 10 ft and 20 ft. Standard length tolerance: �1/8 in ElectroGalv � Often referred to as zinc plated, the steel and 0.5 mil of zinc are bonded by an electrolysis process Most commonly applied to small fittings, hardware, and threaded products Green � Urethane powder resins are applied electrostatically to the steel after fabrication The result is a minimum of 1.5 mil thickness of urethane coating providing excellent resistance to chipping or peeling GoldGalv � This is a multi-process finish of electro-plated zinc, followed by gold-colored zinc dichromate to give excellent corrosion resistance and superior paint base
  • Channels are cold-formed from hot-rolled, pickled and oiled-strip steel 9/16 X 1-1/8 in slots on 2 in centers 12 ga and 14 ga

Specifications


  • Brand: Unistrut
  • Product Line: P1000
  • Material: Steel/ASTM A653
  • Type: Solid
  • Finish: Pre-Galvanized Zinc
  • Cross Section Area: .555 sq-in
  • Load Capacity: 170 lb
  • Slot Size: 0.875 in
  • Thickness: 12 ga
  • Prop65: WARNING: Cancer -
  • Section Modulus: .29 cu-in
  • Length: 20 ft
  • Width: 1.625 in
  • Height: 1.625 in