• Home
  • QuicKey 5-1/2" x 10' Key Control Joint
Image for QuicKey 5-1/2
+ / - Hover over image to Zoom
Other Views

QuicKey 5-1/2" x 10' Key Control Joint

Brand: BoMetals Mfg#: QK55
Product#: 272QKCJ512
This product is currently not available.
Call for Quote
Based on Product Sourcing
This product has shipping restrictions. Additional Shipping Charges may apply. You may be contacted by Customer Service.
Add to Cart

WARNING: This Product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer, and Lead and lead compounds, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to  www.P65Warnings.ca.gov.


Please Login to receive Special Pricing
Not Registered? Create an Account



Description


QuicKey™ is a stay in place metal keyed control joint former for use in concrete flatwork as a control or construction joint.


Features


  • QuicKey [Patent No. 6502359] is the only galvanized joint system that features knockouts for square dowels, which provide better load transfer over round dowels and also reduce edge curl on the slab
  • For use in concrete flatwork as a control or construction joint QuicKey, the only galvanized joint system featuring knockouts for square dowels, which provide better load transfer over round dowels and also reduce edge curl on the slab
  • Eliminates costly form stripping and saw cutting. Replaces the slow and costly method of checker board placement of concrete
  • Install intermediate stakes on 2 ft centers 5 stakes per 10 ft section. Drive stakes to bottom of the line. Additional stakes shall be used with the remaining slots for support if soil conditions require
  • With elevation checked by instrument, stretch a line the length of the joint and set the line at the finished elevation if cap is used, drive stakes 3/16 in deeper
  • QuicKey™ [Patent No. 6502359] is the only galvanized joint system that features knockouts for square dowels, which provide better load transfer over round dowels and also reduce edge curl on the slab
  • Install intermediate stakes on 2 ft centers 5 stakes per 10 ft section. Drive stakes to bottom of the line. Additional stakes shall be used with the remaining slots for support if soil conditions require
  • Finish the concrete flush to the top edge of the key joint. Be sure the concrete fills key without void or honeycomb
  • Space joints as indicated on drawings, as called for in specifications or as recommended by either ACI or PCA
  • Tongue and groove design provides excellent load transfer characteristics for heavy, wheeled traffic and prevents uneven settling associated with aggregate interlock
  • Saves on installation time, stake quickly interlocks at any point with key joint, reducing time to place stakes precisely
  • Hang key joint on stakes and push downward. Locking tab stakes will product an audible click indicating a positive interlock. Stake clips and splices are available if needed
  • 24 ga, G60 hot dipped mill galvanized steel

Specifications


  • Brand: BoMetals
  • Product Line: Quickey
  • Slab Width: 5.5 in
  • Material: 24 ga Steel
  • Thickness: 24 ga
  • Prop65: WARNING: This Product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer, and Lead and lead compounds, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to
  • Finish: Hot Dip Galvanized
  • Length: 10 ft
  • Width: 6 in
  • Special Features: 1.25 X 1.5 in Knockout
  • Usage: For Concrete Floor Slabs