• Home
  • Glaze 'N Seal Wet Look Green Sealer for Southern California 5 gal
Image for Glaze 'N Seal Wet Look Green Sealer for Southern California 5 gal from White Cap
+ / - Hover over image to Zoom
Other Views

Glaze 'N Seal Wet Look Green Sealer for Southern California 5 gal

Brand: Glaze 'N Seal Mfg#: 114
Product#: 327WLGREEN5G
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.
Add to Cart

WARNING: Cancer -  www.P65Warnings.ca.gov.

Please Login to receive Special Pricing
Not Registered? Create an Account


Glaze ‘N Seal “Wet Look” GREEN is a revolutionary superlow VOC formula (75% lower than previous formulas) that complies with the strictest air quality regulations in the nation including South Coast AQMD. It is suitable for use in any “Green” building pro


  • LEED Eligible
  • Use Indoors or Outdoors
  • High gloss solvent base
  • Re-coatable
  • Strong resistance to efflorescence
  • Meets All Air quality requirements
  • Prevents staining/High solids
  • Fast Drying and Long Lasting
  • Fast drying and long lasting
  • Non-Yellowing
  • 75% Lower VOC
  • Use indoors or outdoors


  • Brand: Glaze 'N Seal
  • Product Line: Wet Look Green
  • Prop65: WARNING: Cancer -
  • Mixing Style: Ready To Use Do Not Shake
  • Standards: OSHA, CSA Certified
  • Specific Gravity: .91
  • Curing Method: Air Dry
  • VOC Content: 95 g/l
  • Coverage: 100 - 400 sq-ft/gal
  • Form: Liquid
  • Capacity: 5 gal
  • Finish: High-Gloss
  • Application Temperature: 50 - 80 deg F deg F
  • Applicable Materials: Concrete, Natural Stone, Pavers, Porous Tile & Brick
  • Odor/Scent: Characteristic
  • Composition: p-Chloro-a,a,a-triflourotoluene, Acetone, Poly(Methylmethacrylate/nButyl), Xylene, Ethyl Benzene
  • Flammability Rating: 3
  • Thickener: Lacquer
  • Color: Clear
  • Resists: UV Fading, Abrasion and Efflorescence
  • Type: Film Forming Sealer
  • Mixing Ratio: Ready To Use Do Not Shake
  • Packing Type: Jug
  • Application Method: Sprayer, Brush
  • Base Type: Solvent
  • Flash Point: 35 deg F
  • Number of Mixing Steps: Ready To Use Do Not Shake
  • Media: Carbon Dioxide, Dry Chemical, Halon, Foam, Water Spray
  • Drying Time: 1 hr hr
  • Usage: For Concrete Surfaces, Pavers, Masonry and Porous Tile