• Home
  • Euclid Aqua Cure VOX 55 gal
Image for Euclid Aqua Cure VOX 55 gal from White Cap
+ / - Hover over image to Zoom
Other Views

Euclid Aqua Cure VOX 55 gal

Brand: Euclid Mfg#: 050V 55
Product#: 619050V55
This product is currently not available.
Call for Quote
Based on Product Sourcing
This product has shipping restrictions. Additional Shipping Charges may apply. You may be contacted by Customer Service.
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.
Add to Cart

Please Login to receive Special Pricing
Not Registered? Create an Account


AQUA-CURE VOX is an acrylic polymer blend membrane forming curing and sealing compound. AQUA-CURE VOX is suitable for use over new and old concrete and performs well on both interior and exterior surfaces. AQUA-CURE VOX resists “blushing” due to moistur


  • Can contribute to LEED points
  • Hardens concrete surfaces by promoting proper cement hydration
  • Helps eliminate dusting through good strength development
  • Seals concrete surfaces to protect against the effects of weathering
  • Gives an alternative to solvent based materials where fumes may be objectionable, undesirable, or non-compliant
  • Dries to a clear transparent film that resists yellowing under exterior or ultraviolet exposure
  • Low odor acrylic cure and seal


  • Brand: Euclid
  • Product Line: Aqua Cure VOX
  • Application Method: Sprayer, Roller
  • Packing Type: Drum
  • Odor/Scent: Mild
  • Type: Low Odor
  • Standards: ASTM C309
  • Base Type: Water
  • Capacity: 55 gal
  • Form: Liquid
  • Temperature Range: 50 - 100 deg F
  • Color: White
  • Specific Gravity: 1
  • Traffic Time: 4 - 6 hr Foot, 6 - 10 hr Wheel
  • VOC Content: 184 g/l
  • Application Time: 4
  • Composition: Polymer, Glycol Ether Solvent, Dipropylene Glycol Dibenzoate
  • pH Range: 9
  • Coverage: 200 - 300 sq-ft/gal Curing and Sealing New Concrete, 250 - 350 sq-ft/gal Sealing Existing Concrete
  • Finish: Slight-Gloss
  • Drying Time: 1 - 2 hr, 2 - 4 hr Recoat hr
  • Flash Point: 200 deg F
  • Usage: For Hospitals, Exterior Concrete, Walls, Industrial Floors, Basements and Footings, Interior and Exterior Concrete Surfaces, Pavements