• Home
  • BoMetals QuicKey 7-1/2" x 10' Key Control Joint
Image for BoMetals QuicKey 7-1/2
+ / - Hover over image to Zoom
Other Views

BoMetals QuicKey 7-1/2" x 10' Key Control Joint

Brand: BoMetals Mfg#: QK75
Product#: 272QKCJ712
This product is currently not available.
Call for Quote
Based on Product Sourcing
Add to Cart

WARNING: This Product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer, and Lead and lead compounds, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to  www.P65Warnings.ca.gov.


Please Login to receive Special Pricing
Not Registered? Create an Account



Description


QuicKey Control Joint, 24 ga Thick, 10 ft Length, 7.5 in Slab Width, Hot Dip Galvanized, 1.25 X 1.5 in Knockout, Steel, For 8 in Concrete Slabs


Features


  • Saves on installation time, stake quickly interlocks at any point with key joint, reducing time to place stakes precisely
  • Finish the concrete flush to the top edge of the key joint. Be sure the concrete fills key without void or honeycomb
  • Eliminates costly form stripping and saw cutting. Replaces the slow and costly method of checker board placement of concrete
  • Install intermediate stakes on 2 ft centers 5 stakes per 10 ft section. Drive stakes to bottom of the line. Additional stakes shall be used with the remaining slots for support if soil conditions require
  • LOCKING-TAB™ stakes provide a positive interlock between stake and key joint that eliminates floating or rising from the stake, minimizing high spots. The stake profile features a non-twist design which allows the stake to be driven at a straight angle
  • Hang key joint on stakes and push downward. Locking tab stakes will product an audible click indicating a positive interlock. Stake clips and splices are available if needed
  • For use in concrete flatwork as a control or construction joint QuicKey, the only galvanized joint system featuring knockouts for square dowels, which provide better load transfer over round dowels and also reduce edge curl on the slab
  • With elevation checked by instrument, stretch a line the length of the joint and set the line at the finished elevation if cap is used, drive stakes 3/16 in deeper
  • QuicKey™ [Patent No. 6502359] is the only galvanized joint system that features knockouts for square dowels, which provide better load transfer over round dowels and also reduce edge curl on the slab
  • Non-removable cap seals the joint because it stays in place
  • 24 ga, G60 hot dipped mill galvanized steel
  • QuicKey™ is the only galvanized joint system that features knockouts for square dowels, which provide better load transfer over round dowels and also reduce edge curl on the slab
  • Stiffening ribs are designed for increased rigidity while installing
  • QuicKey™ removable cap yields straight void ready for sealing
  • Space joints as indicated on drawings, as called for in specifications or as recommended by either ACI or PCA
  • Tongue and groove design provides excellent load transfer characteristics for heavy, wheeled traffic and prevents uneven settling associated with aggregate interlock
  • Knockout sizes meet both ACI and PCA recommendations for the design of tongue and groove key joint

Specifications


  • Brand: BoMetals
  • Product Line: Quickey
  • Thickness: 24 ga
  • Prop65: WARNING: This Product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer, and Lead and lead compounds, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to
  • Specifications: 10 Piece/Bundle
  • Finish: Hot-Dipped Galvanized
  • Material: 24 ga Steel
  • Slab Width: 7.5 in
  • Length: 10 ft
  • Special Features: 1.25 X 1.5 in Knockout
  • Usage: For Use with 8 in Concrete Slabs