• Home
  • ARDEX MC Rapid 2 Comp System 22 lb
Image for ARDEX MC Rapid 2 Comp System 22 lb from White Cap
+ / - Hover over image to Zoom
Other Views

ARDEX MC Rapid 2 Comp System 22 lb

Brand: ARDEX Mfg#: 12614
Product#: 471MCRAPID
$367.69
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account



Description


A one-coat, fast-track 100% solids epoxy moisture control system formulated to suppress moisture vapor emissions in new and existing concrete prior to installing ARDEX Americas Underlayments. Product Capabiltiies: Use to treat areas of new concrete that m


Features


  • No sand broadcast required for underlayment applications of 1/4 in or less
  • Ready to prime in just 4 hr
  • Reduces vapor emissions to below maximum acceptable levels for floor coverings
  • For RH readings up to 100%
  • ATSM E96 perm rating less than 0.10
  • Tenacious bond to substrate
  • For RH readings up to 100 percent
  • Use under all modular commercial and residential floor coverings such as VCT, vinyl tile and plank, carpet tile, linoleum tile, rubber tile and wood on interior substrates only
  • Solvent free, alkali resistant
  • Can be applied to damp concrete
  • One-coat epoxy resin system

Specifications


  • Brand: ARDEX
  • Product Line: MC Rapid
  • Applicable Materials: Concrete
  • Packing Type: Container
  • Finish: Smooth
  • Traffic Hours: 4 hr
  • Setting Time: 4 - 24 hr hr
  • Container Size: 22 lb
  • Coverage: 250 - 270 sq-ft sq-ft
  • Mixing Style: Mixing Paddle, Low Speed Drill
  • Yield Strength: 150 psi
  • Type: Moisture Control
  • Color: Black
  • Standards: ASTM E96/F2170
  • Practical Square Feet: 270 sq-ft
  • Media: Carbon Dioxide, Dry Chemical, Foam, Water Spray
  • Traffic Time: 4 hr hr
  • Temperature Range: 70 deg F deg F
  • Mixing Ratio: Add entire pre-measured contents of Part B (Hardener) into Part A (Resin)
  • Flash Point: 212 deg F
  • Odor/Scent: Amine
  • Tensile Strength: 150
  • Specific Gravity: 1.7 - 1.8
  • VOC Content: 19.9
  • Characteristics: Metallic Liquid Physical State
  • Drying Time: 4
  • Application Temperature: 50
  • Capacity: 22 lb
  • Resists: Alkali
  • Form: Liquid
  • Usage: For Commercial and Residential Floor Coverings on Interior Substrates