• Home
  • Adhesives Technology Ultrabond HS200 Epoxy 33 oz
Image for Adhesives Technology Ultrabond HS200 Epoxy 33 oz from White Cap
+ / - Hover over image to Zoom
Other Views

Adhesives Technology Ultrabond HS200 Epoxy 33 oz

Brand: Adhesives Technology Mfg#: A33-HS200
Product#: 579A33HS200
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account


HS-200 Epoxy Anchoring Gel is a two component (2:1 ratio), 100% solids, high modulus, structural epoxy gel. It is a solvent free, no odor, high strength, moisture insensitive, non-sag epoxy system. HS-200 has a long working time (20 minutes at 75° F), while providing an anchor that can be loaded in as little as 4 hours. HS-200 has been tested in accordance with ICC - AC58 and is acceptable for long term tensile loads. It may also be used for short term tensile load anchors, which includes wind and seismic forces


  • Moisture insensitive
  • Long working time with a quick cure time moisture insensitive
  • Non-sag epoxy system
  • One of the strongest adhesives in the industry


  • Brand: Adhesives Technology
  • Product Line: Ultrabond HS200
  • VOC Content: 11.02 g/l
  • Application Temperature: 35 - 110 deg F
  • Form: Paste
  • Compressive Strength: 13860 psi
  • Color: White Part A, Black Part B
  • Mixing Style: Nozzle
  • Flash Point: 300Part A, 200Part B deg F
  • Storage Temperature: 40 - 95 deg F
  • Mixing Ratio: 2:1
  • Packing Type: Cartridge
  • Specific Gravity: 1.6 Part A, 1.4 Part B
  • Type: 2-Part, High Modulus, High Strength
  • Application Method: Spray
  • Odor/Scent: Slight Part A, Slight Amine Part B
  • Standards: ASTM C881-02
  • Capacity: 33 oz