• Home
  • Adhesives Technology Ultrabond HS200 Epoxy 16.5 oz
Image for Adhesives Technology Ultrabond HS200 Epoxy 16.5 oz from White Cap
+ / - Hover over image to Zoom
Other Views

Adhesives Technology Ultrabond HS200 Epoxy 16.5 oz

Brand: Adhesives Technology Mfg#: A16-HS200
Product#: 579A16HS200
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.
Add to Cart

WARNING: Cancer and Reproductive Harm -  www.P65Warnings.ca.gov.

Please Login to receive Special Pricing
Not Registered? Create an Account


HS-200 Epoxy Anchoring Gel is a two component (2:1 ratio), 100% solids, high modulus, structural epoxy gel. It is a solvent free, no odor, high strength, moisture insensitive, non-sag epoxy system. HS-200 has a long working time (20 minutes at 75° F), while providing an anchor that can be loaded in as little as 4 hours. HS-200 has been tested in accordance with ICC - AC58 and is acceptable for long term tensile loads. It may also be used for short term tensile load anchors, which includes wind and seismic forces


  • One of the strongest adhesives in the industry
  • Non-sag epoxy system
  • Moisture insensitive
  • Long working time with a quick cure time moisture insensitive


  • Brand: Adhesives Technology
  • Product Line: Ultrabond Hs200
  • Flash Point: 300Part A, 200Part B deg F
  • Application Temperature: 35 - 110 deg F
  • Odor/Scent: Slight Part A, Slight Amine Part B
  • Storage Temperature: 40 - 95 deg F
  • Mixing Ratio: 2:1
  • Form: Paste
  • Type: 2-Part, High Modulus, High Strength
  • Application Method: Spray
  • Prop65: WARNING: Cancer and Reproductive Harm -
  • Mixing Style: Nozzle
  • Standards: ASTM C881-02
  • Color: White Part A, Black Part B
  • Specific Gravity: 1.6 Part A, 1.4 Part B
  • Packing Type: Cartridge