• Home
  • 1-1/4" Closed Cell Backer Rod Sold/1 Ft
Image for 1-1/4
+ / - Hover over image to Zoom
Other Views

1-1/4" Closed Cell Backer Rod Sold/1 Ft

Mfg#: 530BR114
Product#: 530BR114
This product is currently not available.
Call for Quote
Based on Product Sourcing
Add to Cart

Please Login to receive Special Pricing
Not Registered? Create an Account


KOOL-ROD is a closed cell, polyethylene, flexible, rope-like foam joint backing material. This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds. KOOL-ROD is specifically designed as a compressible backing material to be used in conjunction with a wide variety of cold-applied joint sealants.


  • For use in expansion or construction joints in concrete and precast concrete walls, floors
  • Backing for elastomeric and other applied caulking sealants
  • Easy to handle, smaller packaging/Added contractor convenience
  • Forces sealant against joint sidewalls/Provides maximum sidewall adhesion
  • Material is odorless and will not stain
  • Easily compressible, lightweight/Installs quickly, stays in place
  • Denver foam is chemically inert and will resist oil, gasoline and most solvents
  • Denver foam backer rod
  • Both hot and cold installations can be installed with Denver foam backer rod
  • Controls depth of sealant/Ensures proper joint design ratio
  • Closed-cell foam technology/Does not allow air or moisture entrapment


  • Color: Dark Gray
  • Water Absorption: 0.020 g/cc
  • Temperature Rating: -90 TO 210 deg F
  • Rod Diameter: 1.25 in
  • Material: Polyethylene Foam
  • Standards: ASTM C1330-96/D5249-92
  • Tensile Strength: 50 psi
  • Density: 1.50 - 2.00 lb/cu-ft
  • Joint Width: .875 in
  • Type: Closed Cell
  • Usage: For All Types of Construction, Expansion, Isolation, Control and Pavement Joints