• Home
  • WR Meadows Pointing Mastic 5 gal
Image for WR Meadows Pointing Mastic 5 gal from White Cap
+ / - Hover over image to Zoom
Other Views

WR Meadows Pointing Mastic 5 gal

Brand: WR Meadows Mfg#: 5130005
Product#: 525PTM5
$220.89
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account



Description


POINTING MASTIC is a pre-mixed, cold-applied, polymeric, single-component sealing compound. POINTING MASTIC was specifically designed to seal all exterior, vertical, and horizontal terminations of MEL-ROL®, PRECON®, MEL-DEKTM, AIR-SHIELDTM, PERMINATOR®, a


Features


  • Premixed and easy to apply with caulking gun or trowel
  • Excellent cohesive and adhesive strengths
  • Specifically developed for use with detail strips, vaporproofing and waterproofing membranes, protection course boards, and rolled matrix drainage systems
  • The corner and footing on inside corners are finished with Pointing Mastic in the center of the detail strip where the vertical wall and footing meet
  • Cold-applied, 1-Part polymeric sealing compound
  • Surface preparation - all surfaces to receive an application of POINTING MASTIC should be dry, frost-free, clean, and free of all contaminants
  • Pointing mastic should also be applied at the laps around corners, extending 12 in (305 mm) in each direction from the corner
  • A bead of POINTING MASTIC should also be applied between membrane and clamping rings and at all terminations, drains, and protrusions
  • Follow manufacturer�s precautions when using a solvent as a cleaner
  • Will not lose bond once applied
  • Application temperature should coincide with the product is it being used with
  • Follow manufacturer's precautions when using a solvent as a cleaner
  • A bead of Pointing Mastic is applied to the top edge horizontal termination of the vaporproofing or waterproofing membranes on vertical walls
  • Application Method - For easy application, store at temperatures of 60 deg F (16 deg C) or higher before using. Material will be stiffer and more difficult to work with at cooler temperatures. POINTING MASTIC can be easily applied with a caulking gun or trowel. Apply only in areas that will not be covered with a waterproofing membrane. Apply and spread the material to a thickness of approximately 1/8 in (3.18 mm) in a strip 1 - 3 in (25.4 - 76.2 mm) wide
  • A bead of Pointing Mastic is applied to the top edge horizontal termination of the vapor proofing or waterproofing membranes on vertical walls
  • Application Method - For easy application, store at temperatures of 60 deg F (16 deg C) or higher before using. Material will be stiffer and more difficult to work with at cooler temperatures. POINTING MASTIC can be easily applied with a caulking gun or trowel. Apply only in areas that will not be covered with a waterproofing membrane. Apply and spread the material to a thickness of approximately 1/8 in (3.18 mm) in a strip 1 - 3 in (25.4 - 76.2 mm) wide.
  • The outside corner is finished with POINTING MASTIC in the lower center point where vertical wall and footing meet
  • Cleanup - tools can be cleaned with mineral spirits at the end of each workday

Specifications


  • Brand: WR Meadows
  • Product Line: Pointing Mastic
  • Standards: VOC Compliant
  • Application Method: Caulking Gun, Trowel
  • Application Temperature: 60 deg F
  • VOC Content: 242 g/l
  • Specific Gravity: 1
  • Color: Black
  • Capacity: 5 gal
  • Media: Dry Chemical, Foam, Water Fog
  • Composition: Petroleum Asphalt, Xylene, Ethylbenzene
  • Flammability Rating: 2
  • Packing Type: Pail
  • Type: Cold-Applied, Pre-Mixed
  • Temperature Range: 40 - 90 deg F
  • Form: Semi Solid
  • Flash Point: 110 deg F
  • Coverage: 200 Linear ft/gal
  • Usage: For Sealing Top Edge Terminations on Detail Strip and Membrane and to Adhere Protection Course