• Home
  • WR Meadows Pointing Mastic 29 oz
Image for WR Meadows Pointing Mastic 29 oz from White Cap
+ / - Hover over image to Zoom
Other Views

WR Meadows Pointing Mastic 29 oz

Brand: WR Meadows Mfg#: 5130129
Product#: 525PTM29
$13.39
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account



Description


POINTING MASTIC is a pre-mixed, cold-applied, polymeric, single-component sealing compound. POINTING MASTIC was specifically designed to seal all exterior, vertical, and horizontal terminations of MEL-ROL®, PRECON®, MEL-DEKTM, AIR-SHIELDTM, PERMINATOR®, a


Features


  • Premixed and easy to apply with caulking gun or trowel
  • Follow manufacturer�s precautions when using a solvent as a cleaner
  • Cleanup - tools can be cleaned with mineral spirits at the end of each workday
  • Specifically developed for use with detail strips, vaporproofing and waterproofing membranes, protection course boards, and rolled matrix drainage systems
  • The corner and footing on inside corners are finished with Pointing Mastic in the center of the detail strip where the vertical wall and footing meet
  • Pointing mastic should also be applied at the laps around corners, extending 12 in (305 mm) in each direction from the corner
  • A bead of POINTING MASTIC should also be applied between membrane and clamping rings and at all terminations, drains, and protrusions
  • Excellent cohesive and adhesive strengths
  • A bead of Pointing Mastic is applied to the top edge horizontal termination of the vapor proofing or waterproofing membranes on vertical walls
  • Application Method - For easy application, store at temperatures of 60 deg F (16 deg C) or higher before using. Material will be stiffer and more difficult to work with at cooler temperatures. POINTING MASTIC can be easily applied with a caulking gun or trowel. Apply only in areas that will not be covered with a waterproofing membrane. Apply and spread the material to a thickness of approximately 1/8 in (3.18 mm) in a strip 1 - 3 in (25.4 - 76.2 mm) wide.
  • Will not lose bond once applied
  • Application Method - For easy application, store at temperatures of 60 deg F (16 deg C) or higher before using. Material will be stiffer and more difficult to work with at cooler temperatures. POINTING MASTIC can be easily applied with a caulking gun or trowel. Apply only in areas that will not be covered with a waterproofing membrane. Apply and spread the material to a thickness of approximately 1/8 in (3.18 mm) in a strip 1 - 3 in (25.4 - 76.2 mm) wide
  • Surface preparation - all surfaces to receive an application of POINTING MASTIC should be dry, frost-free, clean, and free of all contaminants
  • Follow manufacturer's precautions when using a solvent as a cleaner
  • Cold-applied, 1-Part polymeric sealing compound
  • A bead of Pointing Mastic is applied to the top edge horizontal termination of the vaporproofing or waterproofing membranes on vertical walls
  • Application temperature should coincide with the product is it being used with
  • The outside corner is finished with POINTING MASTIC in the lower center point where vertical wall and footing meet

Specifications


  • Brand: WR Meadows
  • Product Line: Pointing Mastic
  • Color: Black
  • Temperature Range: 40 - 90 deg F
  • Media: Dry Chemical, Foam, Water Fog
  • Specific Gravity: 1
  • Type: 1-Component, Cold-Applied
  • Capacity: 29 oz
  • Composition: Petroleum Asphalt, Xylene, Ethylbenzene
  • Coverage: 200 Linear ft/gal
  • Standards: VOC Compliant
  • Flammability Rating: 2
  • Packing Type: Cartridge
  • Flash Point: 110 deg F
  • Form: Semi Solid
  • Application Method: Caulking Gun, Trowel
  • Application Temperature: 60 deg F
  • VOC Content: 242 g/l
  • Usage: For Sealing Top Edge Terminations on Detail Strip and Membrane and to Adhere Protection Course