• Home
  • WR Meadows Mel-Prime Mel-Rol Water Based Primer 5 gal
Image for WR Meadows Mel-Prime Mel-Rol Water Based Primer 5 gal from White Cap
+ / - Hover over image to Zoom
Other Views

WR Meadows Mel-Prime Mel-Rol Water Based Primer 5 gal

Brand: WR Meadows Mfg#: 5145005
Product#: 525MRMP5
$219.19
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account



Description


SPECIAL ORDER ONLY – Call your local branch (see Location link above). MEL-PRIME W/B water-based adhesive is a ready-to-use compound specifically formulated with polymers in a true water-based emulsion. MEL-PRIME W/B appears bright pink in the container a


Features


  • Components work together for positive waterproofing protection
  • Non-combustible
  • Surface must be tacky to the touch before covering
  • Handles with ease on the jobsite
  • Ideal for conditioning new, existing, horizontal, vertical, interior, and exterior concrete surfaces
  • If the work area is very dusty, apply membrane as soon as possible after MEL-PRIME W/B is dry
  • Mixing - product requires thorough mixing prior to application
  • Cleanup - Application equipment can be cleaned with soap and water before MEL-PRIME W/B dries
  • Contains fugitive dye for easy visual confirmation of coverage
  • Drying Time - Dries in approximately one hour, depending on temperature and application rate
  • Once dry, equipment can be cleaned with mineral spirits
  • Application Method - Apply MEL-PRIME W/B in fair weather when the surface and air temperatures are 40 deg F (4deg C) and rising. Apply with a sprayer, roller, or brush at a coverage rate of 250 � 350 ft.2/gal. (6.14 � 8.59 m2/L.) Condition only the area to be covered with the product membrane during the working day. Areas not covered with a membrane in 24 hours must be re-conditioned. NOTE: Metal surfaces do not require conditioning; however, they must be clean, dry, and free of loose paint, rust, or other contaminants.
  • Ready to use no mixing or dilution required
  • Available in a low temperature version for use when air and surface temperatures are between 20° F (-7° C) and 60° F (16° C). An extra-low temp version is also available, ideal for application in extra-low temperatures down to 0º F (-18º C)
  • Special membrane-to-membrane adhesion provides additional overlap security
  • Provides cost-effective, flexible, versatile, dependable, positive waterproofing protection against damaging moisture migration and the infiltration of free water
  • Meets or exceeds the test requirements of all currently applicable specifications
  • Surface Preparation - Concrete should be cured at least 72 hr, be clean, dry, smooth, and free of all voids. Repair spalled areas, fill all voids, and remove sharp protrusions. For additional surface preparation requirements, see instructions for applying MEL-DEK, MEL-ROL, and/or AIR-SHIELD
  • Offers a quick and easy-to-apply system for maximum productivity

Specifications


  • Brand: WR Meadows
  • Product Line: Mel-Prime
  • Application Temperature: 40 deg F
  • Flash Point: 210 deg F
  • Standards: ASTM D 570
  • VOC Content: 350 g/l
  • Packing Type: Pail
  • Flammability Rating: 1
  • Application Method: Sprayer or Roller
  • Composition: Petroleum Asphalt
  • Odor/Scent: Pleasant
  • Color: Black
  • Functional Cure: 1 hr
  • Capacity: 5 gal
  • Temperature Range: 90 deg F
  • Type: Flexible, Versatile, Dependable
  • Base Type: Water
  • pH Range: 9
  • Form: Solid
  • Media: Dry Chemical, Foam, Water Fog
  • Coverage: 250 - 350 sq-ft/gal
  • Tensile Strength: 5900 psi
  • Drying Time: 1 hr
  • Usage: Provides a Cost-Effective Answer to Properly Waterproof Foundations, Vertical Walls, and Below-Grade Floors in Residential and Commercial Construction