• Home
  • Simpson Strong-Tie Epoxy-Tie LV Epoxy Injection Gel 22 oz
Image for Simpson Strong-Tie Epoxy-Tie LV Epoxy Injection Gel 22 oz from White Cap
+ / - Hover over image to Zoom
Other Views

Simpson Strong-Tie Epoxy-Tie LV Epoxy Injection Gel 22 oz

Brand: Simpson Strong-Tie Mfg#: ETILV22
Product#: 137ETILV22
This product is currently not available.
Call for Quote
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.
Add to Cart

Please Login to receive Special Pricing
Not Registered? Create an Account


Epoxy-Tie 2-Part Low Viscosity Injection Epoxy, 22 oz, Cartridge, Side-by-Side Packing, 2000 cp, Liquid Part A, Liquid Part B, White Part A, Black Part B, 24 hr Curing, 1:1 Mixing Ratio, 120 min Setting, ASTM D695


  • ETI Injection Epoxies are specially designed formulations for the injection of cracks in concrete
  • ETI is available in two viscosities: ETI-LV (low viscosity) and ETI-GV (gel viscosity) to handle a wide range of crack widths
  • ETI epoxies are two-component, 1:1 ratio, 100% epoxy solids formulations
  • Properly installed, they provide a repair that is both waterproof and high strength (structural).
  • They are available in 22 oz side-by-side cartridges and are dispensed through a static mixing nozzle using a manual or pneumatic dispensing tool


  • Brand: Simpson Strong-Tie
  • Product Line: Epoxy-Tie
  • Includes: Mixing Nozzle
  • Specific Gravity: 1.21 at 72 deg F
  • Type: 2-Part, Low Viscosity
  • Viscosity: 2000 cp
  • Functional Cure: 24 hr
  • Form: Liquid Part A, Liquid Part B
  • Capacity: 22 oz
  • Storage Temperature: 45 - 90 deg F
  • Application Temperature: 40 deg F
  • Mixing Style: Static Mixing Nozzle
  • Odor/Scent: Sweet Part A, Ammonia Part B
  • Standards: ASTM D695
  • Color: White Part A, Black Part B
  • Resists: Distilled Water, Dilute Inorganic Acids and Alkalis
  • Mixing Ratio: 01:01
  • Packing Type: Cartridge, Side-by-Side
  • Curing Time: 24 hr
  • Flash Point: 256 deg F
  • Setting Time: 120 min
  • Special Features: 2 yrs Shelf Life
  • Usage: For Repairing Non-Moving Cracks in Concrete Walls, Floors, Slabs, Columns and Beams, Inject Cracks in Damp or Wet Conditions