• Home
  • Sika Sikaflex-2c NS Tan Color Pack
Image for Sika Sikaflex-2c NS Tan Color Pack from White Cap
+ / - Hover over image to Zoom
Other Views

Sika Sikaflex-2c NS Tan Color Pack

Brand: Sika Mfg#: 91248
Product#: 43842216T
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account


Sikaflex-2c NS is a 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a non-sag consistency. Meets ASTM C-920, Type M, Grade NS, Class 25, use T, NT, M, G, A, O, I and Federal Specification TT-S-0022


  • High elasticity with a tough, durable, flexible consistency
  • Adheres to most substrates commonly found in construction
  • Color uniformity assured via Color-pak system
  • Placeable at temperatures as low as 40°F
  • Paintable with water-, oil-, and rubber-base paints
  • Exceptional cut and tear resistance and can adhere to most substrates without priming
  • Jet fuel resistant
  • Non-sag even in wide joints
  • An effective sealant for use in Exterior Insulation Finish Systems (EIFS)
  • Intended for use in all properly designed working joints with a minimum depth of 1/4 inch
  • Ideal for vertical and horizontal applications
  • Capable of ±50% joint movement


  • Brand: Sika
  • Product Line: Sikaflex-2c NS
  • Functional Cure: 3 days
  • Drying Time: 6 - 8 days Tack Free
  • Application Temperature: 40 - 100 deg F
  • Specific Gravity: 1.55 Part A, 1.02 Part B
  • Standards: ASTM C920
  • Flash Point: 230 deg F Part A, 112 deg F Part B
  • Shore Hardness: 25 +/-5 Shore A
  • Application Method: Spray
  • Temperature Range: -40 TO 170 deg F
  • Base Type: Polyurethane
  • Mixing Style: Nozzle
  • Color: Tan
  • Composition: Polyisocyanate Prepolymer, Xylene
  • VOC Content: 19 g/l Part A, 92 g/l Part B
  • Tensile Strength: 95 psi
  • Odor/Scent: Aromatic
  • Coverage: 231 cu-in/gal
  • Flammability Rating: 1 Part A, 2 Part B
  • Media: Carbon Dioxide, Foam
  • Form: Solid Part A, Liquid Part B
  • Resists: Chemicals
  • Application Time: 3 - 4 hr
  • Type: 2-Part, Premium Grade
  • Usage: For All Types of Joints