• Home
  • Powers Fasteners PowerFoam 750 mL 29 oz
Image for Powers Fasteners PowerFoam 750 mL 29 oz from White Cap
+ / - Hover over image to Zoom
Other Views

Powers Fasteners PowerFoam 750 mL 29 oz

Brand: Powers Fasteners Mfg#: 08132
Product#: 21108132
$16.39
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account



Description


PowerFoam is a single component, moisture curing expanding polyurethane foam. The adhesive strength of PowerFoam allows it to be set on various types of building elements including concrete, brick, wood, metal, aluminum and steel. When installing the foam, consideration should be given to the 2-3 times expansion of the foam after it leaves the plastic tube. The surface of the foam initially dries within 1- 5 hours and becomes fully cured in 12-15 hours. The foam works best at room temperature. It is dispensed through a straw-like plastic tube that is packaged with the can. The structure of the hardened foam provides excellent insulation against heat and noise. The foam has a R-5 equivalent value when used in place of traditional installation methods.


Features


  • Low odor
  • Does not rot or deteriorate with age
  • Class B2 flame retardant
  • Contains no urea formaldehyde or PCBs
  • Stop and Go application product remains liquid in applicator until dispensed
  • CFC free propellant
  • Minimal subsequent expansion (+/- 10%)
  • Precision plastic valve helps prevent pressure loss and prolongs shelf life
  • Physiologically harmless when fully cured

Specifications


  • Brand: Powers Fasteners
  • Product Line: PowerFoam
  • Resists: Water
  • Media: Foam
  • Color: Beige
  • Composition: Polymethylene Polyphenyl Isocyanate, Dimethyl Ether
  • Flammability Rating: 3
  • Applicable Materials: Concrete, Masonry, Wood, Metal
  • VOC Content: 100 g/l
  • Packing Type: Can
  • Capacity: 29 oz
  • Compressive Strength: 1.0 psf
  • Flash Point: -18 deg C
  • Coverage: 1.8 cu-ft/Can
  • Odor/Scent: Mild Amine
  • Specific Gravity: 1.1
  • Drying Time: 12 - 15 hr Full, 5 - 10 min Tack Free, 1 - 5 hr Initial
  • Type: 1-Part
  • Form: Sticky when Wet
  • Application Temperature: 41 deg F