• Home
  • Euclid Hi-Flow Grout 50 lb
Image for Euclid Hi-Flow Grout 50 lb from White Cap
+ / - Hover over image to Zoom
Other Views

Euclid Hi-Flow Grout 50 lb

Brand: Euclid Mfg#: 088H 50
Product#: 619088H50
Based on Product Sourcing
This product has shipping restrictions. Additional Shipping Charges may apply. You may be contacted by Customer Service.
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.

Please Login to receive Special Pricing
Not Registered? Create an Account


HI-FLOW GROUT is specially designed for use where high tolerance, high strength and high fluidity are required. It is formulated as a natural aggregate system with a shrinkage-compensating binder and is highly flowable without sacrificing strength or performance capabilities. HI-FLOW GROUT is formulated to provide consistent and exacting performance in critical grouting operations.


  • Non-shrink with minimum positive expansion for high-tolerance performance
  • High strength for maximum load bearing
  • Does not contain any chlorides or additives which may contribute to corrosion of base structure
  • Non-bleeding and non-segregating at a fluid consistency
  • Total shrinkage compensation provides a maximum bearing surface for the greatest overall support
  • Excellent working time at high ambient temperatures
  • Highly fluid and extremely placeable for easy field use
  • Can contribute to LEED points
  • Rapid strength gain to minimize turnaround time for equipment regrouts


  • Brand: Euclid
  • Product Line: Hi-Flow
  • Temperature Range: 40 - 100 deg F
  • Packing Type: Bag
  • Tensile Strength: 550 psi After 28 Days
  • Form: Powder
  • Standards: ASTM C1107
  • Specific Gravity: 3.45
  • Flammability Rating: 0
  • Color: Gray
  • Composition: Crystalline Silica (Quartz)/Silica Sand, Portland Cement, Silica, Fused, Amorphous Silica, Calcium Salt
  • Type: High Tolerance, Non-Shrink
  • Base Type: Cement
  • Capacity: 50 lb
  • Setting Time: 3 hr 50 min Initial, 4 hr 50 min Final
  • Compressive Strength: 8500 psi After 28 Days
  • Usage: For Structural Columns, Crane Rails, Bridge Seats, Bearing Plates and Anchorages