• Home
  • 4" Closed Cell Backer Rod sold/ft
Image for 4
+ / - Hover over image to Zoom
Other Views

4" Closed Cell Backer Rod sold/ft

Mfg#: 530BR4
Product#: 530BR4
This product is currently not available.
Call for Quote
Based on Product Sourcing
Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required.
Add to Cart

Please Login to receive Special Pricing
Not Registered? Create an Account


Denver Foam Closed Cell Backer Rod, Series: IEA, 4 in Rod Diameter, 3.5 in Joint Width, LDPE Foam, Gray, -90 TO 210 deg F, 50 psi Tensile Strength, 0.02 Water Absorption, 1.5 - 2 lb/cu-ft Density, Expansion Joints


  • Both hot and cold installations can be installed with Denver foam backer rod
  • Denver foam backer rod
  • Denver foam is chemically inert and will resist oil, gasoline and most solvents
  • Use with cold-applied sealants
  • Water resistant
  • Non-exuding
  • For use in expansion or construction joints in concrete and precast concrete walls, floors
  • Backing for elastomeric and other applied caulking sealants
  • Material is odorless and will not stain
  • Easy to use
  • Lightweight
  • Clean product
  • Recyclable
  • Inert


  • Density: < 1.50 lb/cu-ft
  • Rod Diameter: 4 in
  • Temperature Rating: -45 TO 160 deg F
  • Standards: ASTM Specified
  • Type: Closed Cell, Round
  • Joint Width: 3 in
  • Tensile Strength: 29 psi
  • Color: Gray
  • Water Absorption: < 0.030 g/cc
  • Material: Polyethylene Foam
  • Length: 90 ft
  • Usage: For Expansion and Contraction Joints, Curtain Walls, Construction Partitions, Parking Decks and Bridge Construction